01646 687064

Oak Floors Online

Account

Log In
Create New Account
Lost Password

Our Location


Contact us

Shopping Basket

1 £0.00 (ex VAT)

View Basket

A Local Family Run Flooring Business Based In Pembroke Dock, Pembrokeshire - Showroom

Elka 14(3)x120x600 Whitewashed Oak Engineered - Free Sample

Elka 14(3)x120x600 Herringbone Whitewashed Engineered Oak

£53.50 ex VAT per m2(£64.20 inc VAT per m2)


Required Packs - (0.864m2 m2 per pack)

How many packs do I need?

Enter the size of your room below to work out how many packs you will need.

Please note - pictures are for colour reference only (lengths / sizes can differ)

Order a SAMPLE sent via Royal Mail, Evri or Fedex.

* Free sampling is available on many of our products, the more you order, the smaller the piece will be due to postage box sizes.

Free Sample

How To Compare The Samples You Receive

Dyfed Waterproof SPC - Manafactured by Oak Floors Online
Next Day & Standard Delivery to UK & NI
Call For Free Samples
Need Advice? Call 01646 687064

 

 

Description

Uniclic MF dark grey 100Elka 14(3)x120x600 Brushed Whitewashed Oak Engineered Herringbone

Our Elka Herringbone Collection in traditional Tongue & Groove Mulit-ply Core boards. A UV Brushed & Oiled finish, with a a real wood core and a micro-bevelled edge on all four sides. A beautiful Brushed & Oiled finish with a ABC grade shows the quality on offer and it is perfect for nearly any traffic environment.

This Brushed & Whitewashed finish goes perfect in a herringbone format to change the style of any room. With the reasonable 600mm length boards and a great 120mm width board to suit those large rooms.

This engineered oak flooring is 14mm thick and 120mm wide, a full 3.0mm of French oak wear layer. Suitable for underfloor heating and a FSC & PEFC certified manufacture board, you can be sure the quality and sustainable has been thought front and centre.

A Herringbone format is a glue down installation method. With a beveled edge on all four side. Box coverage 0.864m2.

All plans come with grooves on three sides which allow you to achieve multiple design patterns.

Installation & Maintenance

For full details on Elka Installation, please click the link below.

ELKA INSTALL GUIDE

Delivery Information
Maintenance Guide
Although our engineered products have an underside of high quality plywood and are designed to provide extra stability after installation, they’re still constructed of all natural products.After proper and sufficient acclimatisation, the conditions during installation should be maintained as consistently as possible thereafter for optimum performance and to avoid dimensional movement of each board within the finished floor.
For information on important, ongoing maintenance, please refer to our Care & Maintenance guide.
Weather, Humidity, Temperature and the Ongoing Maintenance of Your Flooring  
Because oak is a natural, hygroscopic (water absorbent) material, and its dimensions are directly relative to its moisture content, we must control and maintain the relative humidity within our homes to enable the moisture content of our oak flooring to remain constant. This will ensure stability of each board within the finished floor, because failure to do this may force these boards to change dimensionally and structurally. This is not at all a fault of the flooring itself but all to do with the conditions that it’s being forced to endure.
Here’s an example of what can happen, when the outdoor temperature is 0°C
The maximum amount of water that a cubic metre of air can hold at this temperature is 5 grams, so when you bring this cubic metre of air inside and heat it to 25°C, the relative humidity drops to only 23%. We actually recommend a minimum of 40% for optimum floor stability (incidentally, this is also the level that health experts recommend for our bodies too, so good for our floor and good for us).

But it gets worse as the temperature outside falls lower, and this is why the air inside any heated building in the winter can become too dry, which can obviously have an effect on our flooring (and our bodies).

When relative humidity is allowed to drop too low, our flooring is forced to lose moisture itself and will try to curl upwards towards the dry air (similar to a piece of bacon under a grill) in an effort to find moisture.Any time the temperature outside is well below freezing, relative humidity inside will be below 20% unless you do something to increase it, and not increasing it can have a devastating effect on your oak floor.
Technical Information

Additional information

Weight 15 kg
Dimensions 700 × 100 × 100 cm
Finish

UV Oiled
Board Thickness

Board Width

Length

600mm
Oak Wear Layer

3mm
Grade

Mixed
Moisture Content

6-9% on arrival to site.
Profile

Uniclic Multifit – Beveled Edge on 2 Long Sides
Length Tolerance

+/- 1.0mm
Width Tolerance

+/- 0.2mm
Thickness Tolerance

+/- 0.5mm
Carton Size and Weight

1830mm x 192mm x 14mm
m2 Per Carton

0.864m2
m2 Per Pallet

0.864m2
Installation Method

Float, Glue Down, Nail/Screw Down
Suitable for UFH?

Yes
Product Code

14120HERRINGBONEWHITE
Free Sample Available?

YES
Specification

For a full specification guide, please visit the link below.

TECHNICAL SPECIFICATION

 

You May Also Need...

SKU: 14120HERRINGBONEWHITE Categories: , , , Tags: , , , , , , , , , ,