15(4)x120 Unfinished Herringbone Oak Flooring H1010A
£48.69 ex VAT per m2(£58.43 inc VAT per m2)
How many packs do I need?
Enter the size of your room below to work out how many packs you will need.
Please note - pictures are for colour reference only (lengths / sizes can differ)
Order a SAMPLE sent via Royal Mail, Evri or Fedex.
* Free sampling is available on many of our products, the more you order, the smaller the piece will be due to postage box sizes.
Free Sample
Description
15mm x 4mm x 120mm x 600mm Oak Herringbone Character Unfinished
Our Character Oak Herringbone Unfinished engineered wood flooring with its traditional parquet look will be sure to create a unique impression in your home. The surface has been sanded back to 120 grit, ready for the consumer to apply a finish of their desire. This allows you as the consumer to finish with a wax oil such as Osmo or a Lacquered finished. This floor is extremely durable and due to the thickness of the oak top layer it can be re sanded a number of times if needed. Our Herringbone utilises a tongue and groove installation method and is suitable for gluing down.
The length of these boards are fixed at 600mm lengths, with left and right handed boards.
Our Rustic range within the Dyfed Collection provided a cheaper option, with a larger / distressed knots to highlight the grade of oak used. A Tongue & Groove construction allows for both a glue down or floating installation method. With a beveled edge on all four sides.
Installation & Maintenance
Fitting Information
Can be floated, nailed down or glued down and is suitable for installation above UFH.
Details of all these methods can be found in our Fitting Guidelines guide.
The multiply back construction of our Engineered Oak flooring provides much greater stability than Solid Oak when subjected to varying levels of heat, humidity, and moisture. This also enable the boards to be manufactured a lot wider than solid without risk of cupping, which is associated with the wide solid oak boards available.
This stability allows the floor to be installed as a floating floor where conditions permit, directly onto concrete or timber subfloors, and is ideal for floating floor installation over an underlay that can provide your floor with extra protection from possible moisture attack from beneath.
Engineered Oak can also be fitted above underfloor heating when the correct installation guidelines are followed and the necessary levels of heat, humidity and moisture are maintained by the owner after installation.
IMPORTANT NOTE:
Sometimes the plywood backed engineered boards will seem as if they are ‘bowed’ from end to end when they are first removed from the packaging. This is very common with a plywood backed product because of the difference in molecular structure of the solid oak face and the plywood backing.
NB: Please note that our 15mm Engineered boards are not structural grade and when fitted using the floating floor method over large areas or over an uneven subfloor, some ‘give’ may be present within the floor after installation. In such situations (or where there’s any risk of this happening) we advise that the boards should be installed by fixing down, either by nail or glue, depending on your subfloor.
Delivery Information
But it gets worse as the temperature outside falls lower, and this is why the air inside any heated building in the winter can become too dry, which can obviously have an effect on our flooring (and our bodies).
Technical Information
Additional information
| Weight | 25 kg |
|---|---|
| Dimensions | 190 × 19 × 15 cm |
| Finish |
Unfinished and sanded for site finishing |
| Board Thickness | |
| Board Width | |
| Length |
600mm |
| Oak Wear Layer |
4mm |
| Grade |
CD and below for character |
| Moisture Content |
6-9% on arrival to site. |
| Profile |
TG4: T&G sides & ends, all micro bevelled |
| Length Tolerance |
+/- 1.0mm |
| Width Tolerance |
+/- 0.2mm |
| Thickness Tolerance |
+/- 0.5mm |
| m2 Per Carton |
1.152m2 |
| Installation Method |
Glue Down |
| Suitable for UFH? |
Yes |
| Product Code |
15120UNFINISHEDHERRINGBONE |
| Free Sample Available? |
YES |
Specification
This Dyfed Character Herringbone 15mm Engineered Oak is constructed as a Poplar 11mm backed board, consisting of a Solid Oak face or wear layer of 4mm, that forms the T&G, and provides a good strong underside suitable for installation by nailing, gluing or floating. The underside is also ‘sealed’ with a final stabilising veneer.
Our Engineered Boards do not have a softwood core and because of this are strong enough to be fitted using any of the 3 common methods; Glue Down
- 15mm Overall Thickness
- 120mm Wide
- Single Strip Oak Face
- Character Grade, so will contain natural grain and colour variance, sapwood, and various size knots (some filled and sanded)
- 11mm Poplar Backed
- Full 4mm Oak Wear Layer (European Oak)
- 600mm
- Moisture Content 6 – 9%
- Micro Bevelled Sides & Ends
- TG4 End Matched
- 1.152m2 Per Carton
Celtic Character Rustic
- Contains all of the above grades and also some lower grades
- Lower grades allow open natural defects that are repaired with dark filler before being sanded
- All natural features allowed
- All colour differences allowed
- All sapwood variances allowed
You May Also Need...
-
Osmo MS Advance Sausage 600g (Box of 12)
£95.40 ex VAT - (£114.48 inc VAT) View Product -
D3 Wood Adhesive Express 560g
£7.50 ex VAT - (£9.00 inc VAT) View Product -
Osmo MS ADVANCED Flexible Wood Flooring Adhesive 15KG
£95.00 ex VAT - (£114.00 inc VAT) View Product -
Osmo Polyx Oil Original Clear (Matt or Satin Finish) 3032 & 3062
From: £9.50 ex VAT - (£11.40 inc VAT ) View Product -
Scotia Unfinished Solid Oak – 2.4m Length, 15mm x 15mm
£9.50 ex VAT - (£11.40 inc VAT) View Product