01646 687064

Oak Floors Online

Account

Log In
Create New Account
Lost Password

Our Location


Contact us

Shopping Basket

0 £0.00 (ex VAT)

View Basket

A Local Family Run Flooring Business Based In Pembroke Dock, Pembrokeshire - Showroom

Sale!
15(4)x120 Ice White Oiled Herringbone Oak Flooring H1016A

15(4)x120 Ice White Oiled Herringbone Oak Flooring H1016A

Original price was: £51.19.Current price is: £48.00. ex VAT per m2 (£57.60 inc VAT per m2)


Required Packs - (1.152m2 m2 per pack)

How many packs do I need?

Enter the size of your room below to work out how many packs you will need.

Please note - pictures are for colour reference only (lengths / sizes can differ)

Order a SAMPLE sent via Royal Mail, Evri or Fedex.

* Free sampling is available on many of our products, the more you order, the smaller the piece will be due to postage box sizes.

Free Sample

How To Compare The Samples You Receive

Dyfed Waterproof SPC - Manafactured by Oak Floors Online
Next Day & Standard Delivery to UK & NI
Call For Free Samples
Need Advice? Call 01646 687064

 

 

Description

DYFED Herringbone15mm x 4mm x 120mm x 600mm Oak Herringbone Ice White Oiled H1016A

 

Our Oak Herringbone Ice White  Oiled engineered wood flooring with its traditional parquet look will be sure stand out from the crowd with its distinct black grain highlighted. The surface itself is finished with a durable UV Oil, suitable to put up with tough day to day task and sunlight. This floor is extremely durable and due to the thickness of the oak top layer it can be re sanded a number of times if needed. Our Herringbone utilises a tongue and groove installation method and is suitable for gluing down.

The length of these boards are fixed at 600mm lengths, with left and right handed boards.

Our ABC Grade range within the Dyfed Collection provided a quality small knot board. A Tongue & Groove construction allows for both a glue down or floating installation method. With a beveled edge on all four sides.

Installation & Maintenance

Fitting Information

Can be floated, nailed down or glued down and is suitable for installation above UFH.

Details of all these methods can be found in our Fitting Guidelines guide.

This product is suitable for installation over UFH, as long as its surrounding conditions are maintained and controlled as required. 

The multiply back construction of our Engineered Oak flooring provides much greater stability than Solid Oak when subjected to varying levels of heat, humidity, and moisture. This also enable the boards to be manufactured a lot wider than solid without risk of cupping, which is associated with the wide solid oak boards available.

This stability allows the floor to be installed as a floating floor where conditions permit, directly onto concrete or timber subfloors, and is ideal for floating floor installation over an underlay that can provide your floor with extra protection from possible moisture attack from beneath.

Engineered Oak can also be fitted above underfloor heating when the correct installation guidelines are followed and the necessary levels of heat, humidity and moisture are maintained by the owner after installation.

We can supply a Self-Regulating UFH System that’s perfect for use with our Oak Flooring because it never overheats, making it safe and super energy efficient.

IMPORTANT NOTE:
Sometimes the plywood backed engineered boards will seem as if they are ‘bowed’ from end to end when they are first removed from the packaging. This is very common with a plywood backed product because of the difference in molecular structure of the solid oak face and the plywood backing.

It is not a fault with the board and should be expected. It does not cause any problems during installation because of the required staggered joint fixing for an oak floor. Obviously as each board is ‘surrounded’ when fixed, by at least another 4 boards, it is straightened and aligned perfectly every time. In fact, some fitters claim this actually strengthens the floor further.

NB: Please note that our 15mm Engineered boards are not structural grade and when fitted using the floating floor method over large areas or over an uneven subfloor, some ‘give’ may be present within the floor after installation. In such situations (or where there’s any risk of this happening) we advise that the boards should be installed by fixing down, either by nail or glue, depending on your subfloor.

One way of avoiding this challenge is to install our structural grade 21mm board instead – although more expensive per M2, you should still save money if the only method of fixing the 15mm board available is to glue down because this can add another £6-£7 per M2 to your cost.
Delivery Information
Maintenance Guide
Although our engineered products have an underside of high quality plywood and are designed to provide extra stability after installation, they’re still constructed of all natural products.After proper and sufficient acclimatisation, the conditions during installation should be maintained as consistently as possible thereafter for optimum performance and to avoid dimensional movement of each board within the finished floor.
For information on important, ongoing maintenance, please refer to our Care & Maintenance guide.
Weather, Humidity, Temperature and the Ongoing Maintenance of Your Flooring  
Because oak is a natural, hygroscopic (water absorbent) material, and its dimensions are directly relative to its moisture content, we must control and maintain the relative humidity within our homes to enable the moisture content of our oak flooring to remain constant. This will ensure stability of each board within the finished floor, because failure to do this may force these boards to change dimensionally and structurally. This is not at all a fault of the flooring itself but all to do with the conditions that it’s being forced to endure.
Here’s an example of what can happen, when the outdoor temperature is 0°C
The maximum amount of water that a cubic metre of air can hold at this temperature is 5 grams, so when you bring this cubic metre of air inside and heat it to 25°C, the relative humidity drops to only 23%. We actually recommend a minimum of 40% for optimum floor stability (incidentally, this is also the level that health experts recommend for our bodies too, so good for our floor and good for us).

But it gets worse as the temperature outside falls lower, and this is why the air inside any heated building in the winter can become too dry, which can obviously have an effect on our flooring (and our bodies).

When relative humidity is allowed to drop too low, our flooring is forced to lose moisture itself and will try to curl upwards towards the dry air (similar to a piece of bacon under a grill) in an effort to find moisture.Any time the temperature outside is well below freezing, relative humidity inside will be below 20% unless you do something to increase it, and not increasing it can have a devastating effect on your oak floor.
Technical Information

Additional information

Weight 25 kg
Dimensions 190 × 19 × 15 cm
Finish

Finish

Ice White
Board Thickness

Board Width

Length

600mm
Oak Wear Layer

4mm
Grade

Mixed
Moisture Content

6-9% on arrival to site.
Profile

TG4: T&G sides & ends, all micro bevelled
Length Tolerance

+/- 1.0mm
Width Tolerance

+/- 0.2mm
Thickness Tolerance

+/- 0.5mm
m2 Per Carton

1.152m2
Installation Method

Glue Down
Suitable for UFH?

Yes
Free Sample Available?

YES
m2 Per Pallet

1.152m2
Specification

This Dyfed Character Herringbone 15mm Engineered Oak is constructed as a Poplar 11mm backed board, consisting of a Solid Oak face or wear layer of 4mm, that forms the T&G, and provides a good strong underside suitable for installation by nailing, gluing or floating. The underside is also ‘sealed’ with a final stabilising veneer.

Our Engineered Boards do not have a softwood core and because of this are strong enough to be fitted using any of the 3 common methods; Glue Down

  • 15mm Overall Thickness
  • 120mm Wide
  • Single Strip Oak Face
  • ABC Grade
  • 11mm Poplar Backed
  • Full 4mm Oak Wear Layer (European Oak)
  • 600mm
  • Moisture Content 6 – 9%
  • Micro Bevelled Sides & Ends
  • TG4 End Matched
  • 1.152m2 Per Carton

You May Also Need...

SKU: 15120ICE-HERRINGBONE-H1016A Categories: , , Tags: , , , , , , , , , , ,