0800 043 3073
01646 687064

Oak Floors Online

Account


My Account Page

Our Location



Contact us

Shopping Basket

0 £0.00 (ex VAT)

View Basket
osmo 600g sausage

Price Promise

Competitive on Price & Free Returns

osmo 600g sausage

Fast UK Delivery

Currently Shipping 1-2 Working Days
osmo 600g sausage

All Items Are Kept In Stock

Warehouse located in Pembrokeshire
osmo 600g sausage

Free Samples

1st Class Royal Mail Post

14(3)x150 Brushed & Natural Oiled Oak Flooring

£35.00 ex VAT per m2(£42.00 inc VAT per m2)


Free Sample

How To Compare The Samples You Receive

14mm Thick Boards, 3mm Oak Wear Layer, 150mm Width, 1900mm In Length

This is our new range of a narrower board, with a width of 6 inches in total. This board is great for the living room, bedrooms, hallways.

Brushed and natural oiled mixed grade engineered oak flooring is a stunning oak floor for any home or venue and is one of the most popular within our range of engineered oak flooring.

Thickness

This engineered oak flooring is 14mm thick and 150mm wide. Its made up from 11mm of Eucalyptus plywood underside that is fully bonded to a full 3mm of French oak wear layer. This construction will provide fantastic stability within your finished floor.

Brushed and natural oiled engineered oak flooring is single strip oak. This showcases the extra width available when ordering from our engineered oak flooring range.

The Finish

The brushed and natural oiled mixed grade finish is achieved by ‘brushing’ the face of the planks during manufacture. This removes the slightly softer fibres of the oak. After the oak has been brushed, it is oiled with a natural waxoil, creating a durable finish. After the waxoil is applied to the oak face, the brushing that occurred during manufacture enhances the beautiful grain features of the oak. This results in a slightly textured and natural looking surface.

This finish is very easy to maintain and should only ever require a light sanding and another coat of waxoil to bring it back to pristine condition if/when required (depending on wear and tear). Brushed and natural oiled mixed grade engineered oak flooring should never require a total re-finish. This increases its lifespan and reduces your maintenance costs.

Any open natural features such as knots are filled within our brushed and natural oiled mixed grade engineered oak flooring. This creates a fuller and more blended look that still provides an accent of the natural features in the overall appearance of the flooring.

Having such a textured finish, marks and scratches don’t show up as much as on a smooth finish. The waxoil colour is natural, if you ever want to darken the colour you can apply another coat of waxoil in whatever colour you choose to achieve the exact finish you want. Brushed and natural oiled engineered oak flooring gives you the freedom and flexibility to create your own floor look. It fits in perfectly with the rest of your room and your own personal taste.

Versatility

Brushed and natural oiled engineered oak flooring is one of the most versatile oak floors we stock. It looks great in any room, easily co-ordinating with and complementing your existing décor. If you are looking for a floor that is hard wearing and easy to maintain with a great natural look; one that you can change simply by adding another coat of waxoil to adjust the colour should you want to do so. Then brushed and natural oiled engineered oak flooring is for you.

Additional information

Weight 27 kg
Finish

Brushed & Oiled, finished with natural colour Waxoil

Board Thickness

Board Width

Length

1900mm

Oak Wear Layer

3mm

Grade

Mixed

Moisture Content

6-9% on arrival to site.

Construction

3mm Oak Top Layer on 11mm Eucalyptus Plywood

Profile

TG4: T&G sides & ends, all micro bevelled

Length Tolerance

+/- 1.0mm

Width Tolerance

+/- 0.2mm

Thickness Tolerance

+/- 0.5mm

Carton Size and Weight

1900 x 155 x 130 weighing 30kg Each

m2 Per Carton

2.28

m2 Per Pallet

127.68 (56 Cartons)

Installation Method

Float, Glue Down, Nail/Screw Down

Suitable for UFH?

Yes

Product Code

14150BNO

Free Sample Available?

YES

Can be floated, nailed down or glued down and is suitable for installation above UFH. Details of all these methods can be found in our Fitting Guidelines guide.
This product is suitable for installation over UFH, as long as its surrounding conditions are maintained and controlled as required. 
The multiply back construction of our Engineered Oak flooring provides much greater stability than Solid Oak when subjected to varying levels of heat, humidity, and moisture. This also enable the boards to be manufactured a lot wider than solid without risk of cupping, which is associated with the wide solid oak boards available. This stability allows the floor to be installed as a floating floor where conditions permit, directly onto concrete or timber subfloors, and is ideal for floating floor installation over an underlay that can provide your floor with extra protection from possible moisture attack from beneath. Engineered Oak can also be fitted above underfloor heating when the correct installation guidelines are followed and the necessary levels of heat, humidity and moisture are maintained by the owner after installation.
We can supply a Self-Regulating UFH System that’s perfect for use with our Oak Flooring because it never overheats, making it safe and super energy efficient.

IMPORTANT NOTE: Sometimes the plywood backed engineered boards will seem as if they are ‘bowed’ from end to end when they are first removed from the packaging. This is very common with a plywood backed product because of the difference in molecular structure of the solid oak face and the plywood backing.

It is not a fault with the board and should be expected. It does not cause any problems during installation because of the required staggered joint fixing for an oak floor. Obviously as each board is ‘surrounded’ when fixed, by at least another 4 boards, it is straightened and aligned perfectly every time. In fact, some fitters claim this actually strengthens the floor further.
 
Although our engineered products have an underside of high quality plywood and are designed to provide extra stability after installation, they’re still constructed of all natural products.After proper and sufficient acclimatisation, the conditions during installation should be maintained as consistently as possible thereafter for optimum performance and to avoid dimensional movement of each board within the finished floor.
For information on important, ongoing maintenance, please refer to our Care & Maintenance guide.
Weather, Humidity, Temperature and the Ongoing Maintenance of Your Flooring  
Because oak is a natural, hygroscopic (water absorbent) material, and its dimensions are directly relative to its moisture content, we must control and maintain the relative humidity within our homes to enable the moisture content of our oak flooring to remain constant. This will ensure stability of each board within the finished floor, because failure to do this may force these boards to change dimensionally and structurally. This is not at all a fault of the flooring itself but all to do with the conditions that it’s being forced to endure.
Here’s an example of what can happen, when the outdoor temperature is 0°C
The maximum amount of water that a cubic metre of air can hold at this temperature is 5 grams, so when you bring this cubic metre of air inside and heat it to 25°C, the relative humidity drops to only 23%. We actually recommend a minimum of 40% for optimum floor stability (incidentally, this is also the level that health experts recommend for our bodies too, so good for our floor and good for us).
But it gets worse as the temperature outside falls lower, and this is why the air inside any heated building in the winter can become too dry, which can obviously have an effect on our flooring (and our bodies).
When relative humidity is allowed to drop too low, our flooring is forced to lose moisture itself and will try to curl upwards towards the dry air (similar to a piece of bacon under a grill) in an effort to find moisture.Any time the temperature outside is well below freezing, relative humidity inside will be below 20% unless you do something to increase it, and not increasing it can have a devastating effect on your oak floor.

Our 14 mm Engineered Oak is constructed as a multilayer board, consisting of a Solid Oak face or wear layer of 3mm, with an 11mm plywood backing that forms the T&G, and provides a good strong underside suitable for installation by nailing, gluing or floating. The underside is also ‘sealed’ with a final stabilising veneer.

Our Engineered Boards do not have a softwood core and because of this are strong enough to be fitted using any of the 3 common methods; Glue Down, Nail Down, or Float.

  • 14mm Overall Thickness
  • 150mm Wide
  • Single Strip Oak Face
  • Mixed Grade, so will contain natural grain and colour variance, sapwood, and various size knots (some filled and sanded) Grade details are explained below
  • 11mm (7-Ply) Eucalyptus Plywood Backed
  • Full 3mm Oak Wear Layer (European Oak)
  • Moisture Content 6 – 9%
  • Micro Bevelled Sides & Ends (Unfinished is also available as Square Edge)
  • TG4 End Matched
  • 2.28m2 Per Carton
  • 127.68m2 Per Pallet
  • Extra Important Detail;
    • Suitable for installation above UFH
    • ‘Thermostabile’ Adhesive Provides Maximum Strength Between Plies
    • Sealed Underside for Improved Moisture Protection (reduces risk of ‘cupping’ after installation)
    • Extra Stabilising Veneer to Underside (extra stability after installation)
    • Very Accurate Machining Tolerances for Fast & Simple Fitting (saves on fitting costs)
    • Angled T&G Joint for Excess Adhesive (reduces risk of excess adhesive reaching the surface)
  • All our flooring products are machined to very accurate machining tolerances for fast and simple fitting.
  • Length Tolerance: +/- 1.0mm
  • Width tolerance: +/- 0.2mm
  • Thickness Tolerance: +/- 0.5mm


Grades Explained  Grade A

  • Very few knots if any and no sapwood allowed
  • Clear and consistent grain pattern
  • Very few natural features
  • Slight colour difference allowed

Grade B

  • Small, live knots allowed up to 15mm
  • More natural grain pattern and filled dead knots up to 15mm allowed
  • More natural features allowed
  • More natural colour difference allowed
  • Sapwood allowed up to 10% of face area

Grade C

  • Bigger knots allowed, some repaired with filler before being sanded
  • More natural grain pattern allowed
  • More natural features allowed
  • More natural colour difference allowed
  • Sapwood allowed up to 15% of face area

Grade D

  • Large knots allowed, some repaired with filler before being sanded
  • All natural grain pattern allowed
  • Most natural features allowed
  • Significant natural colour difference allowed
  • Sapwood allowed up to 30% of face area

Celtic Character Rustic

  • Contains all of the above grades and also some lower grades
  • Lower grades allow open natural defects that are repaired with dark filler before being sanded
  • All natural features allowed
  • All colour differences allowed
  • All sapwood variances allowed