ThruFlow brushed and natural oiled oak flooring is more efficient over Underfloor Heating (UFH) than a standard 21mm engineered products. This has been designed for use specifically with Underfloor Heating (UFH). IT has a pre-drilled plywood underside that allows the heat from the UFH to travel through it more easily. This results in the heating efficiency being improved and a considerable saving on the cost of heating.
Our ThruFlow brushed and natural oiled heat efficient flooring is the only flooring available that will eventually pay for itself from the savings made to your heating bills!
Our ThruFlow engineered oak flooring is 21mm thick, the board being constructed of 15mm Eucalyptus plywood underside which includes a 2mm stabilising veneer that is fully bonded to a 6mm French oak wear layer. It has a full cover single strip of oak that is 189mm wide for maximum effect within the finished floor.
Even after the plywood underside is drilled for better heat efficiency, the overall strength still remains as being more than 50% higher than the required standard, which results in it being classed as structural grade. This means that it can be installed over supports like joists or battens without further support, as long as those joists or battens are fixed themselves at centres of no more than 400mm.
Brushed and natural oiled engineered oak flooring is a stunning oak floor for any home or venue. It is by far one of our most popular engineered oak floors, this is why we have used it for our ThruFlow flooring.
Brushed and natural oiled engineered oak flooring is single strip oak, showcasing the extra width benefit available across our engineered oak flooring range.
The ThruFlow brushed and natural oiled finish is achieved by ‘brushing’ the face of the planks during manufacture, which removes the fibres of the oak that are slightly softer. After brushing the oak, it is then oiled with natural waxoil, creating a smooth but slightly textured finish. This enhances the beautiful grain features of natural oak.
The ThruFlow brushed and natural oiled finish of this engineered oak floor is easy to maintain and keep clean, so ideal for allergy sufferers.
Natural features such as knots are filled within this flooring finish and then sanded smooth, creating a fuller and more blended look that still provides an accent of the natural features in the overall appearance of the oak floor with a slightly textured surface.
Marks and scratches do not show up as much as on a smooth finished floor and because the waxoil colour is natural, if you ever want to darken the colour you can apply another coat of waxoil in whatever colour you choose to achieve the finish that you want.
A floor that looks great in any room and one that will easily co-ordinate with and complement your existing décor. If you are looking for a floor that is hard wearing, easy to maintain and with a great look that you can change simply by adding another coat of wax oil to adjust the colour, then brushed and natural oiled engineered oak flooring is for you.
If you are looking for that same quality and appearance but want it for installation over UFH, then our ThruFlow is what you need.
|Product||21(6)x189 ThruFlow Brushed & Natural Oiled Oak Flooring (designed for UFH)|
Brushed & Oiled, finished with natural colour Waxoil
Approx 85% @ 1830mm long, 15% shorter
|Oak Wear Layer||
6-9% on arrival to site.
6mm Oak on 15mm Eucalyptus plywood: structural
TG4: T&G sides & ends, all micro bevelled
|Carton Size and Weight||
1860 x 195 x 140 weighing 30kg each
|m2 Per Carton||
|m2 Per Pallet||
72.8 (35 cartons)
Float, Glue Down, Nail/Screw Down
|Suitable for UFH?||