Osmo Polyx Oil Original Clear (Matt or Satin Finish) 3032 & 3062

Technical Specification

Preparation –

Surfaces must be clean and dry, removing all traces of dust and dirt before application (maximum moisture content 20%). Only apply on frost free surfaces. For guaranteed performance, it is always recommended to remove all traces of a previous finish.

Existing oiled surfaces can be lightly rubbed back with meths then fully cleaned
Pre-existing varnishes and sealers must be completely removed via sanding or using a suitable product stripper or remover
Use Osmo Interior Wood Filler, Osmo Interior Gap Sealer or the Osmo Repair Kit for repairing small dents and holes
To protect against blue stain in moist surroundings, pre-treat with biocide-free wax impregnation Osmo Wood Protector

Application –

How to apply Osmo Polyx Oil
We always recommend applying a test area to ascertain drying times and effect. Osmo Polyx-Oil is ready-to-use from the tin, do not thin. Stir thoroughly prior to application. Osmo oils dry via oxidation so it is important to ensure good ventilation during application and drying.

Application to Wood Floors

The ideal application tool is a firm, fine, natural bristled brush, however the key to a great finish is thin application with removal of any surplus.

1. Apply first coat thinly and evenly along the wood grain with an Osmo Floor Brush – use in conjunction with the Osmo Telescopic Handle for ease of application
2. Remove surplus and leave to dry (8-10 hours)
3. Lightly de-nib the surface, then clean
4. Repeat above steps for second coat

Maintenance Guide

Aftercare –

Regular Cleaning

For daily maintenance a duster, mop or vacuum cleaner will be sufficient. For commercial premises, an electric floor polisher can be used.

For optimal cleaning of floors treated with Osmo Polyx Oil, we recommend the Osmo Spray Mop or Osmo Floor Maintenance Kit.

For regular cleaning, we recommend using Osmo Wash and Care or Osmo Spray Cleaner.

Deep Cleaning

For stubborn scuffs and stains, we recommend Osmo Liquid Wax Cleaner or Osmo Intensive Cleaner.

Please Note: Oiled or waxed surfaces should not be cleaned with a steam cleaner or steam mop as this degrades the performance of the finish.

Renovation

Renovating, even partially, is easy. Just clean and re-treat worn areas with a thin coat of Osmo Polyx Oil. No sanding is required, and no removal of a previous Polyx Oil finish. No repair marks will be visible if applied thinly and appropriately.

Osmo Maintenance Oil can also be used for maintaining and changing the gloss level of surfaces treated with Osmo Polyx Oil.