Osmo Liquid Batten System Installation Pack
£100.00 ex VAT - (£120.00 inc VAT)
 |
| In stock - Delivery Calculated at Checkout |
 |
| Next Day & Standard Delivery to UK & NI |
 |
| Available For Single Order |
 |
| Need Advice? Call 01646 687064 |
Description
Osmo Application Kit
Complete Wood Floor Bonding Kit
Osmo Application Kit is a complete kit to fit up to 20m2 of wood flooring. The kit contains: 10 x 600ml MS Advance sausages, bulk gun, 2 x reusable pre cut nozzles.
Osmo Liquid Batten System Installation Pack (20 M2 Coverage )
Gun applied, high performance elastic adhesive, which is very simple and clean, includes an applicator gun to squeeze beads of the flexible adhesive onto the sub floor for accepting the wood flooring. Clean, easy, and very cost-effective.
Additional Information
Additional information
| Weight | 25 kg |
|---|
Installation Options
Application:
Load a 600ml sausage into the barrel of the application gun and remove the end securing clip which keeps the adhesive in the foil packaging. (see instructions) and replace the black cap onto the gun with the pre-cut nozzle installed within. When used as a liquid batten, extrude a bead of adhesive approximately every 250mm apart at right angles to the direction of the wood flooring. Ensure that the ‘V’ in the pre-cut nozzle is pointing away from you. The application gun should be held a 90 degrees to the substrate. Place the timber into the wet adhesive within 30 minutes to the correct line and level and allow to cure. NOTE: A perimeter gap of 12 – 15mm should be left around the edge of the flooring and also any penetrations into the room such as pipework etc.
Maintenance Guide
Technical Specification
WOOD ADHESIVE FLOOR: SAFE AND SECURE INSTALLATION
- 100% solids and low odour
- Water and solvent free
- Isocyanate free
- High strength
- Waterproof bond
- Early quick grab
- Meets environmental emissions according to DIBt
Advantages:
- Everything you need in kit form.
- Elastic even when cured.
- For solid or engineered wood floor installations