15mm Thick, 4mm Oak Wear Layer, 189mm Width, 1860mm In Length – Brushed & Natural Oiled Oak Flooring, Specially Designed For Under Floor Heating.
Our 15mm Thru-Flow Engineered board has a Thermal Conductivity of 0.12533 W/(m’K) compared to our standard engineered boards without pre-drilled hole boards of 0.10914 W/(m’K).
This unique and exclusive product has been specifically designed for use with underfloor heating, with a pre-drilled plywood underside that allows the heat from the under floor heating to travel through it more easily. This simple improvement in design creates a better ‘through-flow’ of heat and means that the heating efficiency is improved by approximately 25-35%, so the cost saving on your heating bills will in time, actually pay for your flooring! Brushed and natural oiled engineered oak flooring is a stunning oak floor for any home and is by far one of our most popular engineered oak floors; this is why we have used it for our ThruFlow flooring.
This engineered oak flooring is 15mm thick and 189mm wide; the construction of the board being made up from 11mm of Eucalyptus plywood underside that is fully bonded to a 4mm French oak wear layer.
ThruFlow brushed and natural oiled engineered oak flooring is single strip oak, which showcases the extra width available when ordering from our engineered oak flooring range.
The brushed and natural oiled finish is achieved by ‘brushing’ the face of the planks during manufacture, which removes the slightly softer fibres of the oak. After the oak has been brushed, it is oiled with a natural waxoil, creating a durable finish to the oak flooring. After the waxoil is applied, the brushing that occurred during manufacture enhances the beautiful grain features of natural oak, resulting in a slightly textured and natural looking ‘oak-like’ surface.
This finish is very easy to maintain and should only ever require a light sanding and another coat of wax oil to bring it back to pristine condition if/when required (depending on wear and tear).ThruFlow brushed and natural oiled engineered oak flooring should never require a total re-finish, which increases its lifespan and reduces your maintenance costs.
Any open natural features such as knots are filled in on our ThruFlow brushed and natural oiled engineered oak flooring, creating a fuller and more blended look that still provides an accent of the natural features in the overall appearance of the flooring.
Because of the textured finish, marks and scratches don’t show up as much as on a smooth finish and because the waxoil colour is natural, if you ever want to darken the colour you can apply another coat of waxoil in whatever colour you choose to achieve the exact finish that you want. Brushed and natural oiled engineered oak flooring gives you the freedom and flexibility to create your own floor look, which fits in perfectly with the rest of your room and your own personal taste.
Brushed and natural oiled engineered oak flooring is one of the most versatile oak floors we stock and looks great in any room, easily co-ordinating with and complementing your existing décor. If you’re looking for a floor that is hard wearing and easy to maintain with a great natural look; one that you can change simply by adding another coat of waxoil to adjust the colour, then brushed and natural oiled engineered oak flooring is for you.
|Product||15(4)x189mm ThruFlow Brushed & Natural Oiled (designed for UFH)|
Brushed & Oiled, finished with natural colour Waxoil
Approx 85% @ 1830mm long, 15% shorter
|Oak Wear Layer||
6-9% on arrival to site.
TG4: T&G sides & ends, all micro bevelled
4mm Oak on 11mm pre-drilled Eucalyptus plywood
|Carton Size and Weight||
1860 x 195 x 130 weighing 30kg each
|m2 Per Carton||
|m2 Per Pallet||
110.8 (40 cartons)
Float, Glue Down, Nail/Screw Down
|Suitable for UFH?||
Yes: designed specifically for UFH
|Free Sample Available?||
Order in the next
For standard delivery on Tuesday